Health, Safety, and ISO 14001

Organizations considering the implementation of ISO 14001 often ask if the standard is applicable to safety and health programs as well as environmental issues. We believe that the answer is unequivocally yes.
Not only is ISO 14001 applicable to health/safety programs, it can also provide the same benefits that it makes possible in the environmental area. These include:
Meeting and/or exceeding regulatory requirements, Placing greater attention on significant issues not driven by regulations (establishing a safety culture, raising employee morale), Establishing a commitment to improve and measure performance, and Improving communications between managers and hourly employees.
In addition, using ISO14001 to integrate environmental/safety/health programs into the business system produces other benefits. Measures that reduce environmental incidents can decrease or eliminate worker exposures to hazardous materials. Conversely, increasing awareness of safety practices can focus employees’ attention on environmental concerns. In fact, the success of health, safety, and environmental programs often hinges on worker understanding, attitude, and commitment. The corporate culture must change to make these matters a natural part of each employee’s approach to his or her work.
The ISO 14001 standard assumes that such cultural transformation occurs through employee involvement and responsibility from the bottom up, not via dictates from the top. That assumption, and other concepts present in ISO 14001, is applicable to health and safety. Therefore, it’s reasonable to consider the use of the standard in an integrated approach that can bring about change for all three. Some organizations have done so, and many others will eventually see the wisdom of employing ISO 14001 for that purpose.
How can ISO 14001 be useful for health and safety when it was intended to address the environmental aspects of organizations? These three areas are so linked that a management standard for one can have equal applicability to the others. The reason ISO 14001 was not specifically aimed at health and safety had more to do with professional parochialism and the politics of international standards writing than with any concern about the logic of doing so. In ISO 14001, the only acknowledgement that it could be useful for health and safety appears in the introduction, which recommends its use to those who may need to apply the standard to those areas. No other specific references appear in the document, because the standard’s developers felt that health and safety professionals would eventually develop their own version of ISO 14001. This new version has not emerged, and the likelihood of it happening anytime soon is rather low, because current stakeholders’ views militate against it.

Certification Of ISO 14001 Standards

Certification Of ISO 14001

International Organization for Standardization (ISO) is functioning from Geneva in Switzerland as a worldwide federation of national standards organizations. The mission of ISO is to promote the development of standardization and related activities in the world with a view to facilitating the international exchange of goods and services, and to developing corporation in the spheres of intellectual, scientific, technological and economic activity. ISO’s works result in international agreements which are published as international agreements which are published as international standards.

ISO 9000

Previous version of ISO 9000 (1994) emphasize on documents and document control. But as per new standard the extent of documentation can differ from company to company in a simplified manner.

ISO 9000 system requires records at relevant stages which provide data for continual improvement and can be used for legacy as a data bank.

ISO 14000

ISO 14000, the environmental management system family of standards, was formally published by the International Organization for Standardization (ISO) on September 2, 1996. ISO 14001 is the conformance standard within the ISO 14000 series. After extensive groundwork, the revised version of ISO 14001 was released on 15th of November 2004. ISO 14001:2004 will replace ISO 14001:1996 after a transition period of 18 months, ending on 14th May 2006, and will become the basis for the certification procedure for environmental management. All ISO 14001:1996 certificates will be rendered invalid on 15th May 2006

Since 1996 the ISO 14001 has formed the basis for structuring, implementation, review and further development of environmental management systems. It lays down the applicable demands for organizations of all kinds and sizes as well as for diverse geographical, cultural and social conditions. The overall objective is to promote environmental protection and the prevention of environmental stress in harmony with economic, social and political requirements.

OHSAS 18001 is an Occupation Health and Safety Assessment Series for health and safety management systems. It is intended to help an organizations to control occupational health and safety risks (OH&S). The importance of managing Occupational Health and Safety is recognized by all interested parties – employers, employees, customers, suppliers, insurers,shareholders, the community, contractors, and regulatory agencies. It enables an organization to control occupational health and safety risks risks and to improve performance.

Evaluation Of Compliance Of ISO 14001 EMS

The requirement to establish a procedure for periodically evaluating compliance with applicable legal and other requirements falls short of specifically requiring regulatory compliance audits but, in fact, a system of regular regulatory compliance audits may be the most practical means for meeting this requirement of the standard. In the U.S., determination of whether to conduct a compliance audit will be governed in part by the particular jurisdiction’s approach to allowing a legal privilege for the self-assessment audit.

Evaluation vs. Audit – The difference between an evaluation and audit can only be determined by looking outside of ISO 14001. Consulting a dictionary reveals that an evaluation involves a determination of value or worth and that an audit is an examination of accounts done by persons appointed for the purpose. A better definition `is the more specific ISO 19011:2002, Guidelines for Quality and/or Environmental Management Systems Auditing, which defines an audit as a “systematic, independent, and documented process for obtaining audit evidence and evaluating it objectively to determine the extent to which the audit criteria are fulfilled.” Many organizations do not have a system for evaluating regulatory compliance other than their own records and the inspections of regulatory officials. This lack of a verification system can be a risky way to operate. Reports of enforcement actions and consent agreements show that many organizations are blindsided by rogue employees who violate rules and falsify documents to cover up environmental misdeeds. Although ISO 14001 does not prescribe a specific approach to evaluation of regulatory compliance, organizations should consider methods for going beyond verification of records by collecting and evaluating physical evidence.

REQUIREMENTS OF ISO 14001

REQUIREMENTS OF ISO 14001
In order to effectively implement and benefit from an ISO 14001 EMS, it is important to
have an understanding of the standard’s requirements. A quick review of the standard
shows that it is structured following the Plan, Do, Check, Improve philosophy of the
Total Quality Management movement, as follows:

PLAN
4.2 Policy
4.3 Planning

DO
4.4 Implementation and Operation

CHECK
4.5 Checking and Corrective Action

IMPROVE
4.6 Management Review

Within these five elements are 17 sub-elements stating the various requirements.

4.2 Policy

4.3 Planning
4.3.1 Environmental Aspects
4.3.2 Legal and Other Requirements
4.3.3 Objectives and Targets
4.4.4 Environmental Management Programs

4.4 Implementation and Operation
4.4.1 Structure and Responsibility
4.4.2 Training Awareness and Competence
4.4.3 Communications
4.4.4 EMS Documentation
4.4.5 Document Control
4.4.6 Operation Control
4.4.7 Emergency Planning and Response

4.5 Checking and Corrective Action
4.5.1 Monitoring and Measurement
4.5.2 Nonconformance, Corrective, and Preventive Action
4.5.3 Records
4.5.4 EMS Audit

4.6 Management Review

Within these 17 sub-elements are all of the requirements, or “shalls”, necessary to
conform to ISO 14001. There is no substitute for reading the standard in terms of
recognizing the requirements. As a matter of fact, no auditor should embark on an audit
without having easily available the criteria to which they are doing the audit. However,
below we briefly summarize the key points of the sub-elements. This summary is not
intended to be a replacement for ISO 14001, and should not be used exclusively as such
during an audit.

Detailed Section by Section Summary

4.2 Policy
ISO 14001 requires that the organization have a policy statement to drive the EMS.
These tend to be short, one page or less documents, and simply affirm the commitments.
There is no expectation that specific details be noted in the policy. For example, the
commitment to pollution prevention can simply be stated saying, “we are committed to
prevention of pollution”. The policy must be clearly endorsed by top management and
be available to the public and employees. Although the availability to the public can be
rather passive; i.e. “is here if they want it”, there is an expectation that the employee
awareness is more proactive. Section 4.2 of ISO 14001 lists the other requirements of the
policy.

4.3.1 Environmental Aspects
This element requires a procedure that not only identifies the aspects and impacts, but
also provides for determination of significance, and keeping the information up to date.
ISO 14001 does not prescribe what aspects should be significant, or even how to
determine significance. However, it is expected the organization will develop a
consistent and verifiable process to do so.

4.3.2 Legal and Other Requirements
This is a requirement for a procedure that explains how the organization obtains
information regarding its legal and other requirements, and makes that information
known to key functions. This is not the assessment or compliance audit requirement, but
rather a more up front determination of requirements.

4.3.3 Objectives and Targets
There is no requirement for a procedure in this element, only that objectives and targets
be documented. It does require that certain items be considered in developing the
objectives, such as legal requirements and prevention of pollution. It is sometimes
easiest to develop a procedure anyway for this element to be able to verify these
considerations were made.

4.3.4 Environmental Management Programs (EMP)
EMPs are the detailed plans and programs explaining how the objectives and targets will
be accomplished. These EMPs usually note responsible personnel, milestones and dates,
and measurements of success. Noting monitoring and measurement parameters directly
in the EMP facilitates conforming to 4.5.1 on Monitoring and Measurement discussed
below.

4.4.1 Structure and Responsibility
ISO 14001 requires that the relevant management and accountability structure be defined
in this element. This usually takes the form of an organizational chart. Also, the
organization must denote the Management Representative who is responsible to oversee
the EMS and report to management on its operation.

4.4.2 Training Awareness and Competence
The key point in this element is that personnel must receive applicable training regarding
the EMS. Specific requirements are itemized in ISO 14001, and include general,
company-wide items such as knowing the policy, to more function-specific training on
aspects and emergency response. An organization usually responds to this element with a
training matrix, cross-referencing to training materials and records.

4.4.3 Communications
Procedures are required for both internal and external communications. Note that ISO
14001 only requires procedures, and allows the organization to decide for itself the
degree of openness and disclosure of information. Whatever the decision in terms of
disclosure, that decision process must be recorded.

4.4.4 EMS Documentation
This requirement is simply that the organization has documented the system in either
electronic or paper form such that it addresses the elements of the standard and provides
direction to related documentation. Not all ISO 14001-required procedures need to be
documented, as long as the system requirements can be verified.

4.4.5 Document Control.
Procedures are required to control documents, such as system procedures and work
instructions, and to ensure that current versions are distributed and obsolete versions are
removed from the system.

4.4.6 Operational Control
This element is the one which connects the EMS with the organization as a whole. Here,
the critical functions related to significant aspects and objectives and targets are identified
and procedures and work instructions created to ensure proper execution of activities.
Requirements for communicating applicable system requirements to contractors are also
addressed.

4.4.7 Emergency Planning and Response
Although typically addressed through conventional emergency response plans, this
element also requires that a process exist for identifying the potential emergencies, in
addition to planning and mitigating them. A linkage to the aspects analysis, where
impacts are assessed, is appropriate. Emergency incidents include those that may not be
regulated, but may still cause significant impact as defined by the organization.

4.5.1 Monitoring and Measurement
Procedures are required describing how the organization will monitor and measure key
parameters of operations. These parameters relate to the significant aspects, objectives
and targets and legal and regulatory compliance. In order to properly manage the system,
measurements must be taken of its performance to provide data for action. Responses to
this element usually cross reference to many other specific procedures and work
instructions describing measurement and equipment calibration. It is in this element that
we find the requirement for what is commonly referred to as a compliance audit.

4.5.2 Nonconformance, Corrective, and Preventive Action
This element requires procedures for acting on Non-conformances identified in the system,
including corrective and preventive action. Non-conformances may be identified through
audits, monitoring and measurement, and communications. The intent is to correct the
system flaws. Typically, Corrective Action Report (CAR) forms are the norm, noting the
nonconformance, the suggested fix, and closure of the action when completed. Note that
this requirement does not imply in any way that the party identifying the nonconformance
must be the one to suggest the fix. Instead, it is expected that the system provide for the
information to be routed to the most appropriate party to address the concern.

4.5.3 Records
Records are expected to exist to serve as verification of the system operating. For
example, records include audit reports and training records. Unlike controlled
documents, records are “once and done” documents, resulting from the execution of some
process or procedure. Procedures in this element are required for the maintenance of
records.

4.5.4 EMS Audits
ISO 14001 requires that the system provide for internal audits. This procedures(s) will
include methodologies, schedules, and processes to conduct the audits. Interestingly, the
EMS audit will in essence, audit the audit process itself!

4.6 Management Review
This element requires that periodically, top management will review the EMS to ensure it
is operating as planned. If not, resources must be provided for corrective action. For
areas where there are no problems, the expectation is that with time, management will
provide for improvement programs. Usually there is no detailed procedure for this
element, although records of agendas, attendance, and agreed upon action items are
maintained as verification.

ISO 14001 Standard & Environmental Issues

ISO 14001 Standard & Environmental Issues

ISO 14001 is a systematic tool that enables an organization in any market sector to focus on their situation, identify the relevant environmental issues and to lessen their impact to their benefit and the environment. It is part of a global response to the recognition that we are damaging the environment in which we all live. The cause and effect of the foremost world environmental issues, which are all due to mankind, are generally too vast and too intangible for us to grasp and so the slightly cliché expression ‘think global, act local’ is very relevant. Once the EMS is implemented and to become registered to ISO 14001, the external auditor will assess your EMS in two separate stages, on site. The first stage to understand your business activities and determine formal readiness for assessment and the second to check practical compliance with ISO 14001. After registration he will return at regular intervals every year to verify continual improvement and regulatory compliance, against your set objectives and your EMS. The external auditor should be seen as a wise friend, not a policeman. He should certainly explain his findings and assist the company to find ISO 14001 registration is not a cure for all environmental problems but I hope I’ve demonstrated that it is a worthwhile, if not essential business initiative that could enable your management to better manage your business, gain commercial advantage and minimize its environmental impact.

Elements Of ISO 14001 Environmental Management System

Elements Of ISO 14001 Environmental Management System

ISO/DIS 14001 is one of a series of emerging international environmental management standards aimed at promoting
continual improvement in company environmental performance through the adoption and implementation of an environmental management system. The (draft) standard specifies the core elements of an EMS, but contains only those elements that may be objectively audited for certification or self-declaration purposes. A companion guidance standard, ISO/DIS 14004 includes examples, descrïptions and options that aid in the implementation of an EMS and in integrating the EMS into overall management practices. It is not intended for use by certification/registration bodies.

ISO/DIS 14001 defines an overall environmental management system , closely modeled on the ISO 9000 quality systems standard , and covers the following key elements:

· Establishment of an appropriate environmental policy that is documented and communicated to employees and made available to the public, and which includes a commitment to continual improvement and pollution prevention, regulatory compliance and a framework for setting objectives;
· A planning phase that covers the identification of the environmental aspects of the organization’s activities, identification and access to legal requirements, establishment and documentation of objectives and targets consistent with the policy, and establishment of a program for achieving said targets and objectives (including the designation of responsible individuals, necessary means and timeframes);
· Implementation and operation of the EMS including the definition, documentation and communication of roles and responsibilities, provision of appropriate training, assurance of adequate internal and external communication, written management system documentation as well as appropriate document control procedures, documented procedures for operational controls, and documented and communicated emergency response procedures;
· Checking and corrective action procedures, including procedures for regular monitoring and measurement of key characteristics of the operations and activities, procedures for dealing with situations of non-conformity, specific record maintenance procedures and procedures for auditing the performance of the EMS;
· Periodic management reviews of the overall EMS to ensure its suitability, adequacy and effectiveness in light of changing circumstances.

The EMS as outlined in ISO 14001 provides a structured process for the achievement of continual improvement, the rate and extent of which is determined by the organization in light of economic and other circumstances. Although some improvement in environmental performance can be expected due to the adoption of a systematic approach, it should be understood that the EMS is a tool which enables the organization to achieve and systematically control the level of environmental performance that it sets itself. The establishment of an EMS will not, in itself, necessarily result in an immediate reduction of adverse environmental impact. Indeed, care needs to be taken that the mere establishment of an EMS does not lull the organization into a false sense of security. But effectively used, an EMS should enable an organization to improve its environmental performance and avoid or reduce adverse environmental impacts over time.

The Challenge Of ISO 14001 Standards

The Challenge Of ISO 14001 Standards

The building blocks of an environmental management system is an understanding of aspects and impacts.

Implementing ISO 14001 begins with identifying how an organisation’s business activities impact on the

environment.

Many organisations believe they are already aware of the significant aspects and impacts of their operations.

The process of implementing ISO 14001 may uncover significant impacts not previously identified and allows

for a consistent approach to analysis.

Generally this analysis is done department by department or centre by centre.

It is best if it is a team approach that involves the employees who do the activity. An employee’s

familiarity with a task is essential for both the identification of the environmental impacts of business

activities and the determination or implementation of control measures.

An aspect is any element of an organisation’s activities, products or services that can interact with the

environment.

An impact is the change caused to the environment.

Impacts may occur during normal and abnormal operating conditions, such as accidents and emergencies.

Aspects can often be isolated by analysing the inputs and outputs of an activity.

EVALUATION OF IMPACTS

Once the impacts have been determined they have to be evaluated.

Criteria for evaluation include environmental concerns such as the severity of the impact, and business

concerns such as potential regulatory and legal exposure, the probability of the impact occurring, the

cost of changing the impact and effect on public image.

This type of evaluation highlights the significant impacts. These, in turn, determine the significant

aspects. Once the significant aspects have been determined, targets and objectives can be set.