Monday, May 16, 2011

Global Warming & ISO 14001 Standards

It is not difficult to become a believer in global warming. According to the U.S. National Climatic Data Center 2001 was the second warmest year on record and it was the 23rd consecutive year of above normal temperatures. Perhaps most troubling is the fact that the rate of temperature increase is accelerating. Add to this the data just released from insurer Munich Re stating that deaths from natural disasters were more than double in 2001 versus 2000 and insured losses were up more than 50%.UNEP estimates that the extra economic costs of disasters attributable to global warming are running at more than $300 billion annually.
Some 180 countries are proceeding toward an expected ratification of the Kyoto Protocol by the end of this year. Of the six gases it will control CO2 is by far the largest contributing nearly 90% of the global warming impact. The primary source of CO2 is the burning of fossil fuels. Therefore the focus on energy will continue to increase.
Throughout the world different methods are being used to encourage reduced energy use. Japan has enacted the Energy Conservation Law in 1999 mandating huge efficiency improvements by 2004 for nearly all air conditioning products. The U.S. has revised ASHRAE Standard 90.1 for buildings to raise the minimum COP level for centrifugal chillers from the current value of 5.2 to 6.1 effective in October 2001. DOE and Green Seal have revised their recommended efficiency levels to an even higher level of 6.27.
Some countries use laws. Others use codes and standards. An increasing number of countries are using environmental costing which increases the price of energy thereby increasing the financial attractiveness of high efficiency products. European countries have been using such “carbon taxes” for more than a decade. However a rapidly growing trend in developing countries is the reduction of subsidies to energy industries “so prices more accurately reflect environmental impacts” according to OECD’s Environmental Strategy for the First Decade of the 21st Century.
China has shown leadership by reducing subsidies to the coal industry from $24.5 billion in 1990 to $10 billion in 1996 resulting in 7% emissions reduction while seeing a solid economic growth of 36%! China is now moving aggressively into environmental costing with the just announced (1/13/2002) 5-year environmental plan that commits 700 billion yuan ($84 billion) to help protect the environment. The government will provide the fist 65 billion yuan to initiate the project but will apply the “polluter pays” principle for the rest. The “environmental protection authorities will collect funds from the pollution-producing companies”. The impact on the price of energy is not known at this time. However it is clear that the addition of environmental costing will increase energy prices. According to a European Research Commission Report of July 2001 “The cost of producing electricity from coal or oil would double if costs such as damage to the environment and health were taken into account”.
The global movement to high efficiency is accelerating just like the rate of temperature increase. But this is not all that is changing. This second environmental threat of global warming is making it clear that we need to give combined consideration to ozone depletion and global warming. But more important is the need to focus on the real issue which is the total environmental impact not address each individual environmental threat in isolation. This includes the concept of environmental risk exposure, which recognizes that there are other environmental threats that are less well understood today. However, there are “no regrets” decisions we can make today (such as minimum refrigerant charge, minimum atmospheric life refrigerants, etc.) to minimize these risks.
Combined consideration would place more emphasis on reducing the use of CFCs, which are still being produced in developing countries until 2010 in accordance with the Montreal Protocol. Little attention is being given the large contribution to global warming from CFCs. Actions which cause confusion and delay the phaseout of CFCs cause increased environmental damage rather than lessening the environmental impact.
The other rapidly changing factor in the HVAC industry is the shift to becoming a hermetic industry, where refrigerant is contained throughout the life of a chiller and recycled for further use when the chiller is replaced. This simple understanding that “if it doesn’t get into the environment it does no harm” is a powerful argument, which will lead to the continued use of the most efficient refrigerants in such closed hermetic applications as chillers. In just 15 years annual refrigerants emissions from chillers have been reduced from 25% to well below 1% today. This defines a whole different world than that which existed when the Montreal Protocol was crafted some 15 years ago.
But perhaps the most important change coming to our industry is the realization that there are no new or “perfect” refrigerants waiting to be discovered. There are eight elements that can be combined for use in a vapor compression cycle. All feasible combinations of these eight have been evaluated. The reality is “what we have now is all there is”.
This recognition is why we are now seeing a shift from the search for a perfect refrigerant to a search for the right refrigerant(s) for the right application. Said another way, the highest efficiency refrigerants for the lowest emissions applications. Many in our industry call this “Responsible Use”.

It is not difficult to become a believer in global warming. According to the U.S. National Climatic Data Center 2001 was the second warmest year on record and it was the 23rd consecutive year of above normal temperatures. Perhaps most troubling is the fact that the rate of temperature increase is accelerating. Add to this the data just released from insurer Munich Re stating that deaths from natural disasters were more than double in 2001 versus 2000 and insured losses were up more than 50%.UNEP estimates that the extra economic costs of disasters attributable to global warming are running at more than $300 billion annually.
Some 180 countries are proceeding toward an expected ratification of the Kyoto Protocol by the end of this year. Of the six gases it will control CO2 is by far the largest contributing nearly 90% of the global warming impact. The primary source of CO2 is the burning of fossil fuels. Therefore the focus on energy will continue to increase.
Throughout the world different methods are being used to encourage reduced energy use. Japan has enacted the Energy Conservation Law in 1999 mandating huge efficiency improvements by 2004 for nearly all air conditioning products. The U.S. has revised ASHRAE Standard 90.1 for buildings to raise the minimum COP level for centrifugal chillers from the current value of 5.2 to 6.1 effective in October 2001. DOE and Green Seal have revised their recommended efficiency levels to an even higher level of 6.27.
Some countries use laws. Others use codes and standards. An increasing number of countries are using environmental costing which increases the price of energy thereby increasing the financial attractiveness of high efficiency products. European countries have been using such “carbon taxes” for more than a decade. However a rapidly growing trend in developing countries is the reduction of subsidies to energy industries “so prices more accurately reflect environmental impacts” according to OECD’s Environmental Strategy for the First Decade of the 21st Century.
China has shown leadership by reducing subsidies to the coal industry from $24.5 billion in 1990 to $10 billion in 1996 resulting in 7% emissions reduction while seeing a solid economic growth of 36%! China is now moving aggressively into environmental costing with the just announced (1/13/2002) 5-year environmental plan that commits 700 billion yuan ($84 billion) to help protect the environment. The government will provide the fist 65 billion yuan to initiate the project but will apply the “polluter pays” principle for the rest. The “environmental protection authorities will collect funds from the pollution-producing companies”. The impact on the price of energy is not known at this time. However it is clear that the addition of environmental costing will increase energy prices. According to a European Research Commission Report of July 2001 “The cost of producing electricity from coal or oil would double if costs such as damage to the environment and health were taken into account”.
The global movement to high efficiency is accelerating just like the rate of temperature increase. But this is not all that is changing. This second environmental threat of global warming is making it clear that we need to give combined consideration to ozone depletion and global warming. But more important is the need to focus on the real issue which is the total environmental impact not address each individual environmental threat in isolation. This includes the concept of environmental risk exposure, which recognizes that there are other environmental threats that are less well understood today. However, there are “no regrets” decisions we can make today (such as minimum refrigerant charge, minimum atmospheric life refrigerants, etc.) to minimize these risks.
Combined consideration would place more emphasis on reducing the use of CFCs, which are still being produced in developing countries until 2010 in accordance with the Montreal Protocol. Little attention is being given the large contribution to global warming from CFCs. Actions which cause confusion and delay the phaseout of CFCs cause increased environmental damage rather than lessening the environmental impact.
The other rapidly changing factor in the HVAC industry is the shift to becoming a hermetic industry, where refrigerant is contained throughout the life of a chiller and recycled for further use when the chiller is replaced. This simple understanding that “if it doesn’t get into the environment it does no harm” is a powerful argument, which will lead to the continued use of the most efficient refrigerants in such closed hermetic applications as chillers. In just 15 years annual refrigerants emissions from chillers have been reduced from 25% to well below 1% today. This defines a whole different world than that which existed when the Montreal Protocol was crafted some 15 years ago.
But perhaps the most important change coming to our industry is the realization that there are no new or “perfect” refrigerants waiting to be discovered. There are eight elements that can be combined for use in a vapor compression cycle. All feasible combinations of these eight have been evaluated. The reality is “what we have now is all there is”.
This recognition is why we are now seeing a shift from the search for a perfect refrigerant to a search for the right refrigerant(s) for the right application. Said another way, the highest efficiency refrigerants for the lowest emissions applications. Many in our industry call this “Responsible Use”.

Demographers now project that, in the near future, more people are going to live in cities than in rural areas, and this will be the first time in the history of the world that this has been the case. As a result, while there are many different levels of society and business where global warming needs to be dealt with, cities are going to take an ever expanding role. It’s easy for local governments to pass the buck to state, provincial, or national governments, but this isn’t a sustainable practice. If we’re going to successfully fend off the apocalyptic-scale global warming that many scientists now predict, cities are going to have to take the lead. As a start, here are some basic things that municipal governments can do.

Green roofs: If you fly over any major metropolitan area, you’ll likely see a few patches of green where there are parks or tree-lined streets, but for the most part you will see nothing but bare rooftops dominating the landscape. When you think about it, that’s a lot of space that is simply going to waste. In the city of the future, we’re going to increasingly put all this excess space to use for green purposes. There are a few things we can do up there, including:

Having solar and wind power stations on roof tops can help make buildings and cities in general cleaner and more energy efficient.

Rooftop gardens can help residents grow their own produce rather than having to buy from energy-inefficient sources.

Rooftop trees and greenhouses help balance out deforestation while cleansing smog-filled urban atmospheres.

Expanded public transit: When it comes to moving people around, the private automobile is the most energy-inefficient vehicle ever created. Things like buses and trains are not without emissions, but they have a much lower pollution-per-person ratio. Many cities throughout the developed world are decades behind in this respect and need to catch up fast in order to do their part. We need more rail-based transit systems, and many cities would do well to expand their bus networks.

Pedestrian and bicycle infrastructure: In many cities, it’s a sad state of affairs for pedestrians. If you want to travel on foot, you too often have to deal with landscapes that make walking very difficult, not to mention the culture of motorists who drive fast and aggressively and are not used to sharing the road. For a more sustainable future, we need more pedestrian-friendly landscapes, and it also doesn’t hurt to encourage people to take their bicycles.

Better recycling programs: We have come a long way in the realm of recycling, but too many cities are still stuck in the 90s with their recycling technology. We now have the ability to recycle a much broader spectrum of materials, including plastic bags and soiled containers, but many cities haven’t taken the steps necessary to implement these technologies. This investment, which is relatively small in the big picture, can have hugely positive effects in the long run.

Fuel-efficient fleets: Most cities rely on large fleets of vehicles to provide their basic services. From buses, to sanitary trucks, to road maintenance equipment, all of these vehicles can be made more efficient with new technology. Of course, it costs a lot of money to replace these vehicles, but all vehicles do need to be replaced with newer models sooner or later, and cities should use these opportunities to make their investments more efficient, rather than purchasing the same old polluting vehicles.

As individuals, each of us can contribute to the solution. As a start, we can choose to drive vehicles that are more fuel-efficient. We can plant more trees. We can recycle where practicable. We can take stock of our energy consumption practices and try to reduce them by some factor.

But, what steps can your organization take to help? The answers are varied, depending upon the size of the organization and the related environmental aspects and impacts. But no matter how simple or complex the business, each can benefit from the implementation of a management system based on ISO 14001:2004. This international standard has as its focus the prevention of pollution, accomplished by a teamwork approach to identifying those aspects of the organization’s processes that have the potential for harming the environment and the development of ways to reduce or prevent this harm. In the process, many organizations have found ways to reduce costs by elimination of scrap, changes to their waste disposal processes or reduced use of natural resources. It is the application of the system approach that has proven to be successful. And, once the system is in place, it is logical and beneficial to have that system certified and registered. This provides added assurance that the management system remains effective and also provides public recognition to numerous stakeholders that your organization is committed to the prevention of pollution.

Go to http://www.iso9001store.com for more information on ISO 14001 Standards.

ISO 14001 Standard

1. ISO 14000 Control of documents

ISO 14000 Control of documents

Control of environmental management system documents is important to ensure

2. Possible information sources for determining environmental aspects and environmental impacts

Possible information sources for determining environmental aspects and environmental impacts

3. Initial environmental review

An organization with no existing environmental management system should assess its current position with regard to the environment by means of a review. The aim of this review should be to consider the environmental aspects of the organization’s activities, products and services as a basis for establishing its environmental management system.

4. Methods of examining existing environmental management

Methods that can be used to examine existing environmental management practices and procedures include:

5. Environmental policy

An environmental policy establishes the principles of action for an organization. It sets the level of environmental responsibility and performance required of the organization, against which all subsequent actions will be judged. The policy should be appropriate to the environmental.

6. Prevention of pollution solutions

Prevention of pollution can be incorporated into the design and development of new products and services, as well as into the development of associated processes. Such strategies can, for example, help an organization to conserve resources and reduce waste and emissions associated with products and services.

7. Instructions of environmental policy

Instructions of environmental policy
The environmental policy should recognize that all activities, products and services within the defined scope of an organization’s environmental management system can cause impacts on the environment.

8. ISO 14000 Planning

Planning is critical to the fulfillment of an organization’s environmental policy and the establishment, implementation, and maintenance of its environmental managementsystem. An organization should have a planning process that includes the following elements:

9. Identifying environmental aspects

To identify and have an understanding of its environmental aspects, an organization should collect quantitative and/or qualitative data on the characteristics of its activities, products and services such as inputs and outputs of materials or energy, processes andtechnology used, facilities and locations, transportation methods and human factors.

10. Determining significant environmental aspects

Significance is a relative concept; it cannot be defined in absolute terms. What is significant for one organization may not be significant for another. Evaluating significance involves applying both technical analysis and judgment by the organization.

11. Legal requirements

Legal requirements of ISO 14000
Legal requirements refer broadly to any requirement or authorization that is related to an organization’s environmental aspects as issued by a governmental authority (including international, national, state/provincial and local authorities) and has legal force.

12. Other requirements

Depending on its circumstances and needs, an organization may subscribe voluntarily to requirements, other than legal requirements, that apply to the environmental aspects of its activities, products and services. Such other environmental requirements, if applicable, can include

13. Setting objectives and targets

In setting objectives and targets, an organization should consider several inputs.

14. Performance indicators

Performance indicators of ISO 14000 (KPIs)
Progress towards an objective can generally be measured using environmental performance indicators.

15. Environmental responsibilities of management levels

1. Establish overall direction
2. Develop environmental policy
3. Develop environmental objectives, targets and programs
4. Monitor overall environmental management system performance
5. Assure compliance with applicable legal
6. requirements and other requirements to which the organization subscribes

16. ISO 14000 communication

1. General guidance — Communication
An organization should establish, implement and maintain procedures for communicating internally and externally on its environmental policy, performance or other information, based on its own needs and the needs of interested parties.

17. Environmental training

Types of training include raising awareness of the importance of environmental management.

18. ISO 14000 Documentation

a) statements of policy, objectives and targets,
b) description of the scope of the environmental management system,
c) descriptions of programs and responsibilities,
d) information on significant environmental aspects,
e) procedures,

19. Operational control of ISO 14000

An organization needs to apply some type of operational controls to meet its environmental policy commitments, achieve its objectives and targets, comply with applicable legal requirements and other requirements to which the organization subscribes and manage its significant environmental aspects.

20. Emergency preparedness and response

It is the responsibility of each organization to establish (an) emergency preparedness and response procedure(s) that suits its own particular needs.

21. Monitoring and measurement

An organization should have a systematic approach for measuring and monitoring its environmental performance on a regular basis. Monitoring involves collecting information, such as measurements or observations, over time. Measurements can be either quantitative or qualitative.

22. Evaluation of compliance

ISO 14000 Evaluation of compliance
An organization should establish, implement and maintain a procedure for periodically evaluating its compliance with the legal requirements that are applicable to its environmental aspects, as part of its commitment to compliance. The organization should record the results of this evaluation.

23. Control of records

Records provide evidence of the ongoing operation and results of the environmental management system. A
key characteristic of records is that they are permanent and are, typically, not revised.

24. Review of the environmental management system

An organization’s top management should, at intervals that it determines, conduct a review of its environmental management system to evaluate the system’s continuing suitability, adequacy and effectiveness. This review should cover the environmental aspects of activities, products and services that are within the scope of the environmental management system.

25. ISO 14000 Opportunities for improvement

An organization should continually evaluate its environmental performance and the performance of its environmental management system processes to identify opportunities for improvement. Top management should be involved directly in this evaluation through the management review process